- Overview
- Videos
- Specification
- Materials
Overview
The V650 Flex provides the benefits of stereolithography (SLA) 3D printing in a configurable, large-scale system with twice the print capacity of its nearest rival.
Open-source material capability removes the limitations normally associated with the SLA technique, so that users benefit from the flexibility of using any 355nm resin and can fine-tune print results for specific applications.
Supported by intuitive SolidView build preparation software, the V650 Flex features adjustable beam spot sizes and interchangeable vats for enhanced control, detail and output, while an uninterrupted power supply allows continued operation even during power outages.
Smaller footprint, reduced downtime and increased workflow – the V650 Flex is SLA reimagined.
Videos
Specification
Size and Weight | 1400 x 1270 x 2210mm / 771kg |
Build Envelope | Up to 508 x 508 x 584mm |
Materials Available | Open Source |
Maximum part weight | 54.4kg |
Beam diameter | 0.008 - 0.027in (203 - 686μm) |
Maximum part drawing speed | 700 ips @ 0.030in (762μm) beam size; 150 ips @ 0.005in (127μm) beam size |
X/Y Resolution | 0.0005in (2,000 dpi) |
Materials
Somos® Element | Next-generation resin, ideal for investment casting patterns. |
Somos® NeXt | Stereolithography accuracy with the look, feel and performance of thermoplastic. |
Somos® PerFORM | When applications need strong, stiff, high-heat resistant composites. |
Somos® Watershed XC 11122 | A clear solution delivering ABS and PBT-like properties for stereolithography. |








